The Mitesco System has a large collection of quality fittings available for freestanding, wall, desk or ceiling-mounted options to personalise your fitout. All panels are only available in packs of 2 (same colour)

Panel with polyester internal padding with Snowsound® Technology variable density. Polyester covering in Trevira CS® fabric. Supplied with connections in high-tech polymer and steel and grey or white high-tech polymer front covers. The panel can be directly fixed to the wall through screws (not included). The panel can be also fixed directly to the ceiling with screws (not included)

About the Snowsound Acoustic Range
The issue of acoustics is very complex, extremely simple and non-invasive solutions are needed to resolve it. The project developed with Caimi is an acoustic panel that is made with one single material, polyester, which in addition to its excellent absorbent qualities is completely recyclable, as it does not contain any other materials. Snowsound Acoustic Panels are light, colourful and sufficiently basic to be used even to personalise the surrounding area, as it can be fully inserted in a contemporary context. It can be hung and supported on a stand: it is practical and inexpensive.

Sound is formed by waves that tend to be reflected from solid surfaces having limited absorption capacity therefore making it difficult to listen and converse within your office environment. The sound absorbing characteristics of traditional products tend to demonstrate less capacity to absorb low frequencies (below 500Hz), progressively more with regard to the midrange (between 500 and 2,000Hz) and to a greater extent with regard to the high frequencies (above 2,000Hz).

In the designing of these acoustic panels the objective set was to obtain the entire recyclability of the product at the end of its useful life, in a manner both simple and rapid. For this reason, the panels have been made entirely of polyester; therefore they are "single material" and 100% recyclable without the need of having to separate the outer fabric from the sound-absorbing inner material. Also, all components are made of single materials, plastic or metal and easily disassembled, thus permitting recycling the whole product at 100%.

The number and variety of attachment systems make it possible to meet various acoustic exigencies, designing and architectural. The application of the panels can be: to walls, ceilings, wiring, with magnetic fittings or on self-supporting structures.

A:- The surfaces of the panel are coated with Trevira CS® polyester fabric firmly bonded to the inner wadding with which it forms a single body without a break. This property makes it possible to obtain a surface which, while visually appearing very soft, actually is resistant, difficult to tear or perforate. 

B:- High density polyester. 

C:- Medium density polyester. 

D:- Low density polyester. 

E:- Rigid edge