Motorcycle Gear Indicator Kawasaki KLX 250 All Year Super Sherpa 250 1997-2010 KL250 KLX250 Features: This is a gear indicator display assembly that can accurately display the current gear number. The motorcycle gear indicator has a good display effect, small and beautiful design. Instalación: Medidor de velocidad de la pantalla de la motocicleta el proceso de instalación es simple, práctico y fácil de usar. Con perfecta adaptabilidad, sólo tiene que sustituir y montar. Maquina antes de comprar.

Bienvenido a nuestra tienda y le deseamos una agradable experiencia de compra.somos fabricantes profesionales de piezas de motocicletas.Para cualquier pregunta o inquietud, no dude en ponerse en contacto con nuestro equipo de servicio al cliente. Features: Color: Black Light Color: Red/Blue/Green 1-6 Gear Display Fitment: For Kawasaki KL250 Super Sherpa 1997-2010 Kawasaki KLX250 NON-FI Model ALL YEARS Kawasaki KLX250 FI Model All Years The speed sensor is usually located on the front sprocket Mounted on the cover, the 3-pole black speed sensor coupler is located 20-40 cm (8"-16") from the sensor. Removing the left side fairing or crankcase cover provides access to the connector. If the speedometer is off the front wheel, the sensor coupler is located in the headlight bucket. Verify: 1. Separate the speed sensor coupler (you may need to use a small flathead screwdriver to separate the coupler). Rotate the wheels with the ignition on. The speedometer should read 0. If so, turn off the ignition and proceed to the next step. Otherwise, if the speedometer registers a non-zero speed, you did not disconnect the correct coupler and should look again. 2. After separating the speed sensor coupler, plug in both the male and female 3-prong GFYSHIP harness connectors. Make sure the connector is fully seated. 3. Locate the pickup coil (crankshaft sensor) connector and locate the pickup signal wire. ZX-12R: 2-pole, black connector on the right side of the crankcase Yellow/Black (solid yellow with a thin black stripe)Other models: 4-pole connector on the left side of the crankcase, near the speed sensor connector Black/ Blue (solid black line with a thin blue stripe) Note: To locate the wire, look at the wire color on both sides of the connector. 4. Peel off the black sleeve to expose approximately 3 cm (1.2 inches) of wire. 5. Connect the GFYSHIP black/green wire to this wire using the supplied red wire tap connector. Package Contents: 1 x Gear Indicator


Manufacturer: ‎MUTYNE
Part number: ‎MUTYNE
Item weight: ‎150 g
Packing size: ‎3 x 2 x 1 cm; 150 g
Size: ‎One Size
br>Color: ‎Blue with Bracket
Quantity: ‎1